Youngco World Europe
Youngco World Europe

How to Measure Inner Angle

1. Measure angles with the multi-functional bevel.

2. Set it to the saw. (Fit the central push bar into the groove of miter saw blade)

3. Set the wing bars of the bevel to the reference plane of the miter saw.

4. After removing the bevel, perform cutting right away.

 


How to Measure Outer Angle

1. Measure angles with the multi-functional bevel.

2. (a) After checking measurements, set it to equivalent value at the bottom.

    (b) After checking measurements, set it to inaccurate setting of scale mark, measure outer angles, tighten the clamp, and draw a line adjusting the central push bar to the reference plane on a prepared wood or molding. Then, down to the opposite, recopy to perform the work.

3. Apply the same 2, 3 and 4 processes to measure inner angles.

 


How to Make Geometrical Figures

1. Adjust the red line in the graduated ruler of bevel to the blue line of your desired angular figure.

2. Apply the same 2,3 and 4 processes for the measurement of inner angles.

3. Adjust wood or molding to the saw on the right and left to produce angular figures of pentagon,hexagon,heptagon, and octagon.

4. Finish it neatly, using wood glue.

 


Druckversion Druckversion | Sitemap
© Chung World